产品描述
产品参数
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
详细照片
NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
核磁共振 | Means hole-input with flange | ||
核反应性 | Means shaft-input without flange | ||
063 | Centre-to-centre spacing of worm-gear speed reducer | ||
30 | 比率 | ||
VS | 双输入轴 | F1(FA) | Flange putput shaft |
作为 | 单输出轴 | AB | 双输出轴 |
帕姆 |
| 80B5 | 电机安装设施 |
0.75千瓦 |
| B3 | 安装位置 |
N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
一个 | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
/* 2571 年 1 月 22 日 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 硬度： | 硬化的牙面 |
|---|---|
| 安装： | 90度 |
| 布局： | 扩张 |
| 齿轮形状： | 锥齿轮 |
| 步： | 单步 |
| 类型： | 齿轮减速器 |
| 示例： | US$ 30/件 1 件（最低订购量） | |
|---|
如何正确安装和校准蜗轮减速器
正确安装和校准蜗轮减速器对于确保其最佳性能和使用寿命至关重要。请按照以下步骤安装和校准蜗轮减速器：
- 准备： 安装过程开始前，请准备好所有必要的工具、设备和安全装备。
- 定位： 将蜗杆减速器放置在所需位置，确保其牢固地安装在稳定的表面上。根据需要使用合适的紧固件和安装支架。
- 轴对准： 检查输入轴和输出轴的对准情况。使用精密测量工具确保两轴平行且彼此对齐。
- 底板对准： 将减速器的底板与基础或安装面对齐。在固定底板之前，请确保底板水平且正确对齐。
- 螺栓拧紧： 按照制造商的规格，逐步均匀地拧紧安装螺栓。这有助于确保减速器与安装面之间良好接触。
- 检查是否符合要求： 确认所有旋转部件或运行过程中可能移动的零件都有足够的间隙。避免任何可能造成损坏或性能问题的干涉。
- 润滑： 根据制造商的指南，向蜗轮减速器涂抹推荐的润滑剂。适当的润滑对于平稳运行和减少摩擦至关重要。
- 对齐测试： 安装完成后，在不带负载的情况下短暂运行蜗轮减速器，检查是否有任何异常噪音、振动或错位问题。
- 负载测试： 逐步将预定负载施加到蜗轮减速器上，并监测其运行情况。确保减速器在负载条件下平稳高效地运行。
务必参考制造商针对您特定型号蜗轮减速机提供的安装指南和规格说明。正确的安装和对准有助于提高齿轮箱的可靠性、效率和整体功能。
如何计算蜗轮蜗杆减速器的输入速度和输出速度？
计算蜗轮蜗杆减速器的输入和输出速度需要了解齿轮比和减速原理。以下是计算这些速度的方法：
- 输入速度： 输入速度（N）1是驱动齿轮的转速，在本例中指的是蜗轮蜗杆。该值通常由制造商提供，也可以直接测量。
- 输出速度： 输出速度（N）2) 是从动齿轮（即蜗轮）的转速。要计算输出转速，请使用以下公式：
N2 = N1 / (Z1 * 我）
在哪里：
N2 = 输出转速（rpm）
N1 = 输入转速（rpm）
Z1 蜗轮蜗杆的齿数
i = 齿轮比（蜗轮齿数与蜗杆螺纹数之比）
需要注意的是，蜗轮蜗杆减速器设计用于减速，这意味着其输出速度低于输入速度。此外，减速器的效率、摩擦力和其他因素都会影响实际输出速度。计算输入速度和输出速度对于了解蜗轮蜗杆减速器在特定应用中的性能和能力至关重要。
What Industries Commonly Use Worm Reducers?
Worm reducers are versatile mechanical components that find applications in various industries due to their unique advantages and capabilities. Some of the industries that commonly use worm reducers include:
- 物料搬运： Worm reducers are widely used in material handling equipment such as conveyors, bucket elevators, and cranes to control movement and manage heavy loads.
- Automotive: They are utilized in automotive manufacturing processes, assembly lines, and vehicle positioning systems.
- Food and Beverage: Worm reducers are used in food processing and packaging machinery where hygiene and cleanliness are crucial.
- Agriculture: Agricultural equipment like irrigation systems and tractors use worm reducers for controlling rotational motion.
- Mining and Construction: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
- Energy: Wind turbines and solar tracking systems use worm reducers to convert low-speed, high-torque motion into rotational energy.
- Textile: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
- Packaging: Packaging equipment relies on worm reducers for precise movement and positioning of packaging materials.
- Medical: Medical devices and equipment often utilize worm reducers for their accuracy and controlled motion.
- Printing: Printing machines use worm reducers to regulate paper feed and ensure consistent printing quality.
Worm reducers’ ability to provide high torque output, compact design, and self-locking characteristics makes them suitable for applications requiring reliable and controlled motion across various industries.
editor by CX 2024-04-16
