China S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf wholesaler

Solution Description

S Sequence Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf

 

Input Configurations

Direct motor coupled

With IEC B5/B14 motor flange

With IEC B5/B14 motor mounted

With strong input shaft

Output Configurations

 

Strong output shaft

Strong output shaft with flange

Hollow output shaft

Hollow output shaft with flange

Variants of the Helical Worm Equipment Unit Sequence S / SF / SA / SAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Solid shaft or hollow shaft

Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

 

Specialized Data:

Housing content Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface area hardness of gears HRC58°~62 °
Gear core hardness HRC33~forty
Enter / Output shaft substance 42CrMo alloy metal
Enter / Output shaft hardness HRC25~thirty
Machining precision of gears precise grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Warmth remedy tempering, cementiting, quenching, and so forth.
Effectiveness 94%~96% (depends on the transmission stage)
Sound (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. increase (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China best model bearing, HRB/LYC/ZWZ/C&U. Or other makes asked for, NSK.
Manufacturer of oil seal NAK — ZheJiang or other manufacturers asked for

Attributes

High modular layout, adaptable mounting manner.
Integrated casting housing,compact dimension, steady transmitting and lower noise stage.
Perfect oil leakage avoiding makes the good sealings and can be utilised in wide variety of industry.
Advanced gear grinding and modified profile, high loading assist and far more safe procedure.
Large effectiveness and preserve electrical power.
Help save cost and reduced servicing.

Specification

Product

Shaft Dia.

mm

Horizontal Center Peak mm

External Flange Dia.

 mm

Energy

(kw)

Ratio

(i)

Nominal Torque

(Nm)

Strong Shaft

Hollow Shaft

S/SF/SA/SAF37

ф20

ф20

88

 

.twelve-.55

24-204

a hundred

S/SF/SA/SAF47

ф25

ф30 / ф25

100

160

.eighteen-.75

24-204

one hundred fifty

S/SF/SA/SAF57

ф30

ф35 / ф30

112

two hundred

.seventy five-1.five

24-204

250

S/SF/SA/SAF67

ф35

ф45 /ф40

140

two hundred

.seventy five-three

24-285

460

S/SF/SA/SAF77

ф45

ф60 / ф50

a hundred and eighty

250

.75-7.five

24-385

1200

S/SF/SA/SAF87

ф60

ф70 / ф60

225

350

1.1-eleven

24-389

2000

S/SF/SA/SAF97

ф70

ф90 / ф70

280

450

1.5-eighteen.5

24-389

3500

Business profile

Circumstance

Packing

FAQ

Q1: I want to get your products, how can I spend?
A: You can pay by way of T/T(thirty%+70%), L/C ,D/P etc. 

Q2: How can you guarantee the quality?
A: A single year’s warranty against B/L date. If you meet with top quality issue, please send us photographs or video to check out, we assure to ship spare elements or new merchandise to substitute. Our promise not contain inappropriate procedure or incorrect specification choice. 

Q3: How we decide on versions and technical specs?
A: You can e-mail us the series code (for illustration: RC collection helical gearbox) as properly as need details, such as motor electrical power,output speed or ratio, support factor or your application…as significantly info as feasible. If you can supply some photographs or drawings,it is wonderful. 

Q4: If we never discover what we want on your internet site, what must we do?
A: We offer you 3 possibilities:
one, You can e-mail us the photographs, drawings or descriptions details. We will attempt to style your items on the foundation of our
standard types.
two, Our R&D office is specialist for OEM/ODM merchandise by drawing/samples, you can ship us samples, we do customized style for your bulk purchasing.
three, We can create new merchandise if they have excellent market. We have presently designed many products for unique making use of successful, this sort of as special gearbox for agitator, cement conveyor, sneakers equipment and so on. 

Q5: Can we get 1 laptop of each item for top quality tests?
A: Yes, we are glad to settle for trial get for high quality screening.

Q6: How about your item delivery time?
A: Generally for 20’container, it requires twenty five-30 workdays for RV collection worm gearbox, 35-40 workdays for helical gearmotors.

US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500

Advantages and disadvantages of worm gear reducer

If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.
worm_reducer

Hollow shaft worm gear reducer

Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer

The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm_reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer

R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm_reducer

AGKNX Electric Worm Gear Reducer

AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf     wholesaler China S Series Flange Mounted Helical Worm Gearbox S/SA/Sf/Saf     wholesaler
editor by czh 2022-11-26