产品描述
产品参数
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
详细照片
NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
核磁共振 | Means hole-input with flange | ||
核反应性 | Means shaft-input without flange | ||
063 | Centre-to-centre spacing of worm-gear speed reducer | ||
30 | 比率 | ||
VS | 双输入轴 | F1(FA) | Flange putput shaft |
作为 | 单输出轴 | AB | 双输出轴 |
帕姆 |
| 80B5 | 电机安装设施 |
0.75千瓦 |
| B3 | 安装位置 |
N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
一个 | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| 硬度： | 硬化的牙面 |
|---|---|
| 安装： | 90度 |
| 布局： | 扩张 |
| 齿轮形状： | 锥齿轮 |
| 步： | 单步 |
| 类型： | 齿轮减速器 |
| 示例： | US$ 30/件 1 件（最低订购量） | |
|---|
Can a Worm Gearbox be Used for High-Speed Applications?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- 效率： Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
- 产热量： The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
- 反弹： Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.
While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.
蜗轮减速器在机器人和自动化领域的应用
蜗轮减速器因其独特的特性和优势，在各种机器人和自动化应用中发挥着至关重要的作用。以下是一些蜗轮减速器的常见应用：
- 机械臂运动： 蜗轮蜗杆减速器被应用于机械臂中，以实现精确可控的运动。蜗轮蜗杆减速器的自锁特性有助于保持机械臂的位置，而无需额外的制动器。
- 输送系统： 在自动化生产线中，蜗轮减速器用于驱动传送带，并精确地沿着装配线移动物料或产品。
- 精确定位： 蜗轮蜗杆减速器用于精密定位系统，例如取放机器人和数控机床中的定位系统。它们能确保运动的精确性和可重复性。
- 云台机构： 蜗轮蜗杆减速器广泛应用于监控摄像机、机器人摄像机和传感器的云台机构中。其自锁功能有助于稳定并保持所需的角度。
- 自动门： 蜗轮蜗杆减速器用于自动门系统中，以平稳安全地控制其开启和关闭运动。
- 物料搬运： 仓库和配送中心的机器人使用蜗轮蜗杆箱来操作和提升物体，从而提高物料搬运效率。
- 医疗机器人： 蜗轮减速器被应用于医疗机器人的外科手术、诊断设备和康复设备中，以确保精确可控的运动。
- 工业机器人： 工业机器人依靠蜗轮减速器来完成各种任务，包括焊接、喷漆、装配和包装，在这些任务中，精确的运动至关重要。
- 自动化测试设备： 在测试和检验应用中，蜗轮蜗杆箱可提供必要的运动和定位，以实现精确的测试和测量。
- 食品饮料行业： 蜗轮减速器用于自动化食品加工和包装系统，确保产品卫生、精确地移动。
蜗轮蜗杆减速器因其结构紧凑、扭矩输出高、具有自锁功能以及能够提供直角驱动等优点，在这些应用中备受青睐。然而，选择合适的减速器需要考虑负载、速度、效率和环境条件等因素。
防止蜗轮蜗杆变速箱出现反冲
蜗轮蜗杆传动装置的反冲会导致精度降低、定位误差增大以及整体效率下降。以下是防止或最大限度减少反冲的步骤：
- 高品质组件： 使用制造公差严格的高质量蜗轮蜗杆和蜗轮。精密部件有助于减少反冲。
- 正确网格划分： 确保蜗轮和蜗杆正确对齐并啮合。啮合不当会导致齿隙增大。
- 预加载： 对蜗轮施加少量预紧力有助于减少齿隙。但是，过大的预紧力会增加摩擦和磨损。
- 防反弹机制： 考虑使用防反冲机制，例如弹簧加载系统或可调节垫片，来补偿任何固有的反冲。
- 润滑： 适当的润滑可以减少摩擦，并有助于最大限度地减少反冲。使用具有良好油膜强度和减少磨损的润滑剂。
- 维护： 定期检查和维护变速箱，以便发现并解决随着时间的推移出现的齿隙变化。
在减少齿隙和保持平稳运行之间取得平衡至关重要。咨询齿轮箱专家并遵循制造商的指导方针，将有助于您优化蜗轮蜗杆减速机的性能，同时最大限度地减少齿隙。
editor by CX 2023-09-21
