Retaining in head that very good service is the crucial to cooperating with consumers, we strive to satisfy higher top quality requirements, offer you competitive prices and make sure prompt delivery. With EPG manufacturer registered in more than 70 countries like The usa , Europe , Japan and so on, it has partners among globe prime enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth. Entire use has been manufactured of all kinds of innovative methods and technological innovation to reach excelsior production. EPT 200W 104 Series Of Brushless DC Gear EPTs
Simple Characteristics Of EPT
#8226200W (DC EPT EPT When Used To 24VDC/36VDC/48VDC)
Rated EPT (Steady) | W | two hundred (200W/400W) | |||
Rated velocity | r/min | 2500 | |||
Rated torque | N.m | .764 | |||
Instantaneous maXiHu (West Lake) Dis.mum torque | N.m | 1.146 | |||
Rotor instant of inertia | J:X10-4kg.m2 | .460 | |||
Velocity handle range | RPM | Substantial pressure 200-2500RPM (Reduced force 200-3000RPM) | |||
Velocity handle variety | On load | Beneath plusmn one %: condition ~ rated torque, rated velocity, rated voltage, room temperature | |||
On voltage | Below plusmn1%: issue rated voltage plusmn10%, rated velocity, rated load, room temperature | ||||
On temperature | Underneath plusmn1%: Circumstances of ambient temperature ~ 40 degC rated voltage, rated load and rated pace | ||||
EPT enter | Rated voltage | V | Single period 110V | Solitary phase 220V | 36VDC(Optional 48VDC) |
Voltage tolerance selection | plusmn10% | ||||
Frequency | Hz | fifty/sixty | / | ||
Frequency tolerance assortment | plusmn5% | / | |||
Rated input existing | A | 4.7 | two.4 | 7.5 | |
Instantaneous maXiHu (West Lake) Dis.mum input existing | A | nine. | four.eight | 11.five | |
Product Description
Round Shaft Sort Optical EPT
#8226Z6BLD200-6GU-25S(6GU90RC)-Voltage 24/36/48/one hundred ten/220
#8226Z6BLD200-6GU-25S(6GU90RC) Diagram(ZD StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Travel)
1.Connector: 5557-8R/10R (M0LEX) two.EPT wire size 300mm three.Spherical terminal: SRA-21T-four (Reduced ground)
#8226Reduced Voltage Wrie Plughole Corresp-onding EPTal Rationalization
plughole | one | two | 3 | four |
signal | U | W | Hv | Hu |
plughole | 5 | six | seven | 8 |
signal | V | GND | Hw | Vcc |
#8226Large Voltage Wrie Plughole Corresp-onding EPTal Clarification
| Corresponding which means | |||||||||
one | 2 | three | four | 5 | six | 7 | 8 | nine | 10 |
Blue (coarse) | Yellow (good) | Yellow (coarse) | Environmentally friendly (fine) | Inexperienced (coarse) | Blue (fantastic) | EPT mesh | Red (wonderful) | Black (wonderful) | |
W | Hu | U | Hv | V | Hw | Vcc 5V | GND | ||
#8226PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel Shaft Speed EPT
Z6BLD200-6GU-25S(6GU90RC)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Benefit
1.Connector:5557-8R/10R(MOLEX) 2.The sheath length of direct line 300mm three.Spherical terminal:SRA-21T-4
#8226Decimal Gearhead
5GN()XK-Velocity Ratio Worth, EPTly ten
Gearhead Model | Equipment Ratio | L Dimension |
6GU()K | 3-two hundred | seventy two |
#8226EPTr the EPT ratio in the box () in the product title
#8226Z6BLD200-6GU-25S(6GU90RC) EPT Allowable Torque (Unit: N.m)
Model | EPTSpeed/Reduction Ratio | 3 | 3.six | 5 | six | 7.5 | 9 | twelve.5 | 15 | eighteen | twenty five | thirty | 36 | 50 | 60 | 75 | 90 | a hundred | one hundred twenty | a hundred and fifty | one hundred eighty | 200 |
200~1500RPM | two.forty one | two.ninety | 4.02 | 4.83 | 6.03 | 7.24 | 9.06 | ten.nine | thirteen.one | 16.four | 19.7 | 23.six | 32.8 | 39.three | 40. | forty. | forty. | forty. | forty. | 40. | forty. | |
Z6BLD200-()GU | 2000RPM | two.04 | two.forty five | 3.forty | 4.08 | 5.eleven | 6.13 | 7.67 | nine.20 | 11. | thirteen.nine | 16.6 | 20. | 27.7 | 33.3 | forty. | 40. | 40. | 40. | forty. | forty. | forty. |
2500RPM | one.86 | 2.23 | 3.09 | three.71 | 4.64 | 5.57 | 6.ninety seven | 8.37 | ten. | twelve.six | fifteen.1 | eighteen.two | 25.2 | 30.3 | 37.eight | 40. | 40. | forty. | 40. | 40. | 40. |
#8226L Variety Velocity EPTBe aware :The() (gray) in the desk suggests that the rotation direction is consistent with the motor.(The torque unEPTdifferent speed and velocity ratio is obtained unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
1.Connector: 5557-8R/10R (MOLEX ) 2.EPT wire size 300mm three.Spherical terminal: SRA-21T-four (Low ground)
#8226Z6BLD200-6GU-25S(6GU90RC) EPT Allowable Torque (Device: N.m)
EPTSpeed/Reduction Ratio | five | 10 | 15 | twenty | 30 | fifty | 100 | 200 |
200~1500RPM | four.02 | 8.04 | 12.1 | sixteen.one | 21.eight | 36.three | seventy two.five | 120 |
2000RPM | three.forty | six.eighty one | ten.2 | thirteen.6 | eighteen.4 | thirty.7 | sixty one.3 | one hundred ten |
2500RPM | two.79 | five.fifty eight | eight.37 | eleven.two | 16.7 | 27.nine | fifty five.eight | one hundred |
Observe :All EPT output flip course in kind are reverse as motor flip route.(The torque unEPTdifferent speed and velocity ratio is received unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
#8226Arc Cone RigEPT Angle Pace EPT EPT
Z6BLD200-6GU-25S(6GU90RC)-Voltage 24/36/48/110/220 ()-Velocity Ratio Benefit
Z6BLD200-6GU-25S(6GU90RC)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Value
one.Connector: 5557-8R/10R (MOLEX ) two.The sheath duration of lead line 300mm three.Spherical terminal: SRA-21T-4 (Minimal ground)
#8226 Z6BLD200-6GU-25S(6GU90RC) EPT Allowable Torque (Device: N.m)
Product | EPTSpeed/Reduction Ratio | seven.five | 9 | 12.5 | fifteen | 18 | 25 | 30 | 36 | 50 | 60 | seventy five | 90 | a hundred | 120 | a hundred and fifty | a hundred and eighty | 200 |
two hundred~1500RPM | 6.03 | seven.24 | nine.06 | 10.9 | 13.one | sixteen.4 | 19.seven | 23.6 | 32.eight | 39.three | 40. | forty. | 40. | forty. | forty. | 40. | 40. | |
Z6BLD200-()GU | 2000RPM | 5.23 | six.27 | eight.71 | 10.five | twelve.six | 17.four | 20.nine | twenty five.1 | 31.five | 37.8 | forty. | forty. | forty. | 40. | forty. | 40. | forty. |
2500RPM | four.18 | 5.02 | six.97 | eight.37 | 10. | thirteen.nine | sixteen.seven | twenty.1 | 25.two | 30.3 | 37.8 | forty. | 40. | 40. | 40. | forty. | forty. |
Be aware :The (gray) in the desk indicates that the rotation path is steady with the motor.(The torque unEPTdifferent speed and velocity ratio is attained unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
Firm Info
FAQ
Q: What’re your major merchandise?
A: We at present produce Brushed Dc EPTs, Brushed Dc Gear EPTs, Planetary Dc Equipment EPTs, Brushless Dc EPTs, Stepper motors, Ac EPTs and High EPT Planetary Gear Box and so forth. You can examine the specs for above motors on our site and you can e mail us to advocate needed motors for each your specification too.
Q: How to pick a appropriate motor?
A:If you have motor photographs or drawings to demonstrate us, or you have thorough specs like voltage, speed, torque, motor size, working mode of the motor, essential life span and sounds amount and so on, you should do not wait to let us know, then we can advocate ideal motor for each your request appropriately.
Q: Do you have a personalized service for your stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors?
A: Of course, we can personalize per your request for the voltage, velocity, torque and shaft dimensions/condition. If you need extra wires/cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it as well.
Q: Do you have an person layout provider for motors?
A: Of course, we would like to style motors individually for our customers, but it may possibly need some mould deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing EPT and layout demand.
Q: What is your guide time?
A: EPTly sEPTing, our regular stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd product will need to have fifteen-30days, a bit EPTer for personalized items. But we are quite fleXiHu (West Lake) Dis.ble on the guide time, it will count on the certain orders.
You should get in touch with us if you have thorough requests, thank you
