China Professional Nmrv – 030 Worm Gearbox for Miniature Worm Speed Reducer cycloidal gearbox

Product Description

Specification

Type

Worm Gearbox/Worm Gear Speed Reducer

Model

NMRV:571,030,040,050,063,075,090,110,130,150

Center distance

25-150mm

Ratio

5,7.5,10,15,20,25,30,40,50,60,80,100

Torque

1.8-1800Nm

Motor

2 pole, 4 pole, 6 pole

Mounting position

Omnidirectional

Color

Blue/Silver grey Or On request

Material

NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron

Product Description

 

 

Worm Gear Speed Reducer.

Worm gear speed reducers are popular for their flexibility and efficiency, because they can show the best deceleration capacity in the smallest space and are typically applied in transmissions with low speed and high torque.
The worm speed reducer can also be easily mounted with various accessories like torque arms, different types of flanges, shafts and so on.
We attach much importance to the details of the products. The housing of our worm gearbox is made of aluminum alloy or cast iron,the worm is made of carburized 20Cr, and the suppliers of raw materials are rigorously screened, thus to ensure our products are of high quality, long service life and low noise.
Sihai is a professional manufacturer of speed reducers that can provide you with both single-stage worm gear reducer and two-stage worm gear reducer, as well as customized gearboxes according to your requirement.

Details

Multiple inputs and outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

00:00

 

00:00

 

FAQ

Q1.How to choose a gearbox which meets our requirement?

A1. You can provide the technical information of output speed,motor power,motor parameter,output torque,equipment connection mode etc.Or,you can refer to our catalogue and confirm with me.

 

Q2. How is your price? Can you offer any discount?
A2: We will give the best price we can base on your needs and the quantities.

 

Q3. Do you offer any visiting?
A3: Yes! Welcome!Notify me in advance.

 

Q4. When is the best time to contact you?
A4: Any time, we will reply you as soon as possible.

 

Q5. How long will it take for the lead time?
A5: At the time we agreed

Calculating Gear Ratio in a Worm Reducer

The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:

Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft

For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.

It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.

When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.

Application: Motor, Electric Cars, Machinery, Marine, Agricultural Machinery, Motor, Machinery, Marine, Agri

Does a Worm Reducer Require Frequent Maintenance?

Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

  • Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
  • Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
  • Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
  • Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
  • Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
  • Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
  • Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

cultural Machinery, Building Material Shops

Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Gearbox, Worm Reducer
Hardness: Gearbox, Worm Reducer
Installation: Gearbox, Worm Reducer
Step: Gearbox, Single-Step
Customization:
Available

|

Customized Request

What Industries Commonly Use Worm Reducers?

Worm reducers are versatile mechanical components that find applications in various industries due to their unique advantages and capabilities. Some of the industries that commonly use worm reducers include:

  • Material Handling: Worm reducers are widely used in material handling equipment such as conveyors, bucket elevators, and cranes to control movement and manage heavy loads.
  • Automotive: They are utilized in automotive manufacturing processes, assembly lines, and vehicle positioning systems.
  • Food and Beverage: Worm reducers are used in food processing and packaging machinery where hygiene and cleanliness are crucial.
  • Agriculture: Agricultural equipment like irrigation systems and tractors use worm reducers for controlling rotational motion.
  • Mining and Construction: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
  • Energy: Wind turbines and solar tracking systems use worm reducers to convert low-speed, high-torque motion into rotational energy.
  • Textile: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
  • Packaging: Packaging equipment relies on worm reducers for precise movement and positioning of packaging materials.
  • Medical: Medical devices and equipment often utilize worm reducers for their accuracy and controlled motion.
  • Printing: Printing machines use worm reducers to regulate paper feed and ensure consistent printing quality.

Worm reducers’ ability to provide high torque output, compact design, and self-locking characteristics makes them suitable for applications requiring reliable and controlled motion across various industries.

China Professional Nmrv - 030 Worm Gearbox for Miniature Worm Speed Reducer   cycloidal gearbox	China Professional Nmrv - 030 Worm Gearbox for Miniature Worm Speed Reducer   cycloidal gearbox
editor by CX 2023-08-14