Nmrv-serien snäckväxelreducerare med utgångs- och ingångsflänsar
Maskreducerare
En maskreducerare, även känd som en snäckväxelreducerare, är en typ av växellåda som används för att minska hastigheten och öka vridmomentet på en roterande axel. Den är uppbyggd av en mask, vilket är ett skruvformat kugghjul, och ett snäckhjul, vilket är en ring med tänder som ingriper i masken. När masken vänder sig, den driver snäckhjulet framåt, vilket i sin tur minskar hastigheten och ökar vridmomentet på den utgående axeln.
Selecting the Right Worm Reducer
When selecting a worm reducer, it is important to consider the following factors:
- Torque capacity: The worm reducer must have a torque capacity that is greater than or equal to the torque that is being transmitted.
- Speed ratio: The worm reducer must have the correct speed ratio to achieve the desired speed reduction or increase.
- Input and output shaft sizes: The worm reducer must have input and output shaft sizes that are compatible with the other components in the power transmission system.
- Mounting type: The worm reducer must have a mounting type that is compatible with the application.
- Service environment: The worm reducer must be made of materials that are suitable for the operating environment. Till exempel, a worm reducer that will be used in a corrosive environment should be made of stainless steel.
Produktbeskrivning
| SNÄCKVÄXEL | |||||
| SNW-SERIEN | Utgångshastighetsområde: | ||||
| Typ | Gammal typ | Utgående vridmoment | Utgående axeldiameter | 14 rpm–280 rpm | |
| SNW030 | RV030 | 21 Nm | φ14 | Tillämplig motoreffekt: | |
| SNW040 | RV040 | 45 Nm | φ19 | 0,06 kW–11 kW | |
| SNW050 | RV050 | 84 Nm | φ25 | Inmatningsalternativ1: | |
| SNW063 | RV063 | 160 Nm | φ25 | Med inbyggd AC-motor | |
| SNW075 | RV075 | 230 Nm | φ28 | Inmatningsalternativ2: | |
| SNW090 | RV090 | 410 Nm | φ35 | Med fyrkantig fläns | |
| SNW105 | RV105 | 630 Nm | φ42 | Inmatningsalternativ3: | |
| SNW110 | RV110 | 725 Nm | φ42 | Med ingående axel | |
| SNW130 | RV130 | 1050 Nm | φ45 | Inmatningsalternativ4: | |
| SNW150 | RV150 | 1550 Nm | φ50 | Med ingångsfläns |
Types of Worm Reducers
Worm reducers are available in a variety of types, inklusive:
- Single-worm reducers: Single-worm reducers are the most common type of worm reducer. They use a single worm gear to drive a single worm wheel.
- Double-worm reducers: Double-worm reducers use two worm gears to drive a single worm wheel. This provides even higher torque capacity and lower noise levels than single-worm reducers.
- Rätvinkliga snäckreducerare: Right-angle worm reducers are designed to transmit power between two shafts that are at a right angle to each other.
- Inline worm reducers: Inline worm reducers are designed to transmit power between two shafts that are parallel to each other.
Advantages of Worm Reducers
Worm reducers offer a number of advantages over other types of gear reducers, inklusive:
- High torque capacity: Worm reducers can transmit high torques, even with low input speeds. This makes them ideal for applications where high torque is required, such as lifting and moving heavy objects.
- Low noise levels: Worm reducers operate very quietly, making them ideal for applications where noise is a concern.
- Smooth operation: Worm reducers provide smooth and even power transmission, without any backlash or vibration. This is important for applications where precision is required.
- Hög effektivitet: Worm reducers have efficiencies of up to 98%, which means that they waste very little energy. This makes them an energy-efficient solution for power transmission.
- Durability: Worm reducers are made of durable materials and are designed to withstand harsh operating conditions.
Vi är en av de bästa maskreducerare tillverkare. Vi har exporterat våra produkter till kunder över hela världen och fått ett gott rykte tack vare vår överlägsna produktkvalitet och kundservice. Vi välkomnar varmt kunder både hemma och utomlands att kontakta oss för att förhandla affärer, utbyta information och samarbeta med oss!
