Deskripsi Produk
RV series Karakteristik
- RV – Sizes:–150
- Input Options: with input shaft, With Square flange,With Input Flange
- Input Power 0.06 to 11 kW
- RV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
- Ratios between 5 and 100
- Max torque 1550 N.m and admissible output radial loads max 8771 N
- Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
- Worm wheel: Copper (KK Cu).
- Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
- Size 030 and over are painted with RAL 5571 blue
- Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
- Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug,Small gap
Basic models can be applied to a wide range of power reduction ratios from 5 to 1000.
Warranty: One year from date of delivery.
| WORM GEARBOX | |||||
| SNW SERIES | Output Speed Range: | ||||
| Jenis | Old Type | Torsi Keluaran | Diameter Poros Keluaran | 14rpm-280rpm | |
| SNW030 | RV030 | 21 N.m | φ14 | Applicable Motor Power: | |
| SNW040 | RV040 | 45 N.m | φ19 | 0.06kW-11kW | |
| SNW050 | RV050 | 84 N.m | φ25 | Input Options1: | |
| SNW063 | RV063 | 160 N.m | φ25 | With Inline AC Motor | |
| SNW075 | RV075 | 230 N.m | φ28 | Input Options2: | |
| SNW090 | RV090 | 410 N.m | φ35 | With Square flange | |
| SNW105 | RV105 | 630N.m | φ42 | Input Options3: | |
| SNW110 | RV110 | 725 N.m | φ42 | With Input Shaft | |
| SNW130 | RV130 | 1050 N.m | φ45 | Input Options4: | |
| SNW150 | RV150 | 1550 N.m | φ50 | With Input Flange |
Starshine Drive
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Tim Kami
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures
to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product
is a product inspection to determine the qualified products.
Sedang mengemas
Delivery
| Aplikasi: | Motor, Machinery, Industry |
|---|---|
| Fungsi: | Distribusi Daya, Perubahan Torsi Penggerak, Perubahan Kecepatan, Pengurangan Kecepatan |
| Tata letak: | Vertikal |
| Kekerasan: | Mengeras |
| Instalasi: | Torsi |
| Melangkah: | Tiga Langkah |
| Kustomisasi: | Tersedia | Permintaan Khusus |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Pelumasan: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Kebersihan: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Bahan-bahan yang Digunakan untuk Roda Gigi Cacing
Roda gigi cacing diproduksi menggunakan berbagai macam material untuk memenuhi berbagai kebutuhan aplikasi. Beberapa material yang umum digunakan untuk roda gigi cacing meliputi:
- Baja: Baja merupakan pilihan populer untuk roda gigi cacing karena kekuatan, daya tahan, dan ketahanan ausnya. Baja mampu menahan beban berat dan sering digunakan dalam aplikasi industri.
- Perunggu: Perunggu menawarkan pelumasan yang baik dan umumnya digunakan untuk komponen roda gigi cacing (worm gear). Material ini memberikan ketahanan aus yang efektif dan bekerja dengan baik dalam aplikasi yang membutuhkan pengoperasian yang senyap.
- Besi cor: Besi cor dikenal karena kekuatan dan daya tahannya yang tinggi. Besi cor sering digunakan untuk roda gigi cacing dalam aplikasi yang diperkirakan akan承受 beban kejut atau kondisi kerja berat.
- Aluminium: Roda gigi cacing aluminium ringan dan tahan korosi, sehingga cocok untuk aplikasi di mana pengurangan bobot menjadi hal penting.
- Plastik: Beberapa roda gigi cacing terbuat dari bahan plastik seperti nilon atau asetal. Bahan-bahan ini sering dipilih karena sifat pelumasannya sendiri dan pengoperasiannya yang senyap.
- Bahan Komposit: Material komposit dapat menawarkan kombinasi sifat-sifat seperti konstruksi ringan dan ketahanan terhadap korosi. Material ini dapat cocok untuk aplikasi tertentu.
Pemilihan material bergantung pada faktor-faktor seperti beban aplikasi, kecepatan, lingkungan operasi, dan karakteristik kinerja yang dibutuhkan. Penting untuk mempertimbangkan faktor-faktor ini saat memilih material yang tepat untuk roda gigi cacing guna memastikan kinerja dan umur pakai yang optimal.
Bagaimana Perbandingan Gearbox Cacing dengan Jenis Gearbox Lainnya?
Gearbox cacing menawarkan keunggulan dan karakteristik unik yang membedakannya dari jenis gearbox lainnya. Berikut perbandingan antara gearbox cacing dan beberapa jenis gearbox umum lainnya:
- Kotak Gigi Heliks: Gearbox cacing memiliki perkalian torsi yang lebih tinggi, sehingga cocok untuk aplikasi beban berat, sedangkan gearbox heliks lebih efisien dan menawarkan pengoperasian yang lebih halus.
- Kotak Gigi Bevel: Gearbox cacing berukuran kompak dan dapat mentransmisikan gerakan pada sudut siku-siku, mirip dengan gearbox roda gigi bevel, tetapi gearbox cacing memiliki kemampuan penguncian otomatis.
- Kotak Gigi Planet: Gearbox cacing memberikan output torsi tinggi dan hemat biaya untuk aplikasi dengan rasio reduksi tinggi, sedangkan gearbox planet menawarkan efisiensi lebih tinggi dan dapat menangani kecepatan input yang lebih tinggi.
- Gearbox Spur: Gearbox cacing memiliki ketahanan beban kejut yang lebih baik karena gerakan gesernya, sedangkan gearbox lurus lebih efisien dan cocok untuk aplikasi torsi yang lebih rendah.
- Kotak Gigi Sikloidal: Gearbox sikloidal memiliki kapasitas beban kejut yang tinggi dan desain yang ringkas, tetapi gearbox cacing lebih hemat biaya dan dapat menangani rasio reduksi yang lebih tinggi.
Meskipun gearbox cacing memiliki keunggulan seperti output torsi tinggi, desain kompak, dan kemampuan penguncian otomatis, pilihan antara jenis gearbox bergantung pada persyaratan spesifik aplikasi, termasuk torsi, efisiensi, kecepatan, dan keterbatasan ruang.
editor by CX 2023-10-18
