Deskripsi Produk
Cone Worm Gear Series Double Enveloping Transmission Gear Worm Gearbox
Deskripsi Produk
Series C double enveloping worm gear
Model: 100 – 500
Ratio: 10 -63
Output Torque : 683 – 51180 N.m
Rating Power : 47/25HP(1.41Kw) – 597HP(448Kw)
Working conditions
Two shafts for 90 ° Intersect, input speed must not be more than 1500 rpm.The working environment temperature should range from 0 ~ 40 ° C, when the environment temperature below 0 ° C or above 40 ° C.Before starting the lubricating oil to corresponding heating and cooling, The worm shafts, reverse operation can be positive.
Data sheet on CUW double enveloping worm gear reducer :
| Model | Diameter Poros (mm) | Tinggi Tengah (CUW) | (CUW) Diameter poros keluaran. | Kekuatan | Perbandingan | Torsi yang Diizinkan | Berat |
| (CUW) input Solid(h6) | (mm) | (mm) | (kw) | (Nm) | (KGS) | ||
| 100 | 28 | 190 | 48 | 1.41~11.5 | 10 .25~ 62 | 683-1094 | 42 |
| 125 | 32 | 225 | 55 | 2.42~19.7 | 10 .25 ~ 62 | 1170~2221 | 65 |
| 140 | 38 | 255 | 65 | 3.94~25.9 | 10 .25 ~ 62 | 1555 ~ 3473 | 85 |
| 160 | 42 | 290 | 70 | 4.39~35.7 | 10 .25 ~ 62 | 2143 ~4212 | 120 |
| 180 | 48 | 320 | 80 | 5.83~47.5 | 10 .25 ~ 62 | 2812 ~ 5387 | 170 |
| 200 | 55 | 350 | 90 | 7.52 ~61.2 | 10 .25 ~ 62 | 3624 ~6859 | 220 |
| 225 | 60 | 390 | 100 | 9.9~81.4 | 10 .25 ~ 62 | 4872 ~ 9224 | 290 |
| 250 | 65 | 430 | 110 | 12.9 ~105 | 10 .25~ 62 | 6284~11892 | 380 |
| 280 | 70 | 480 | 120 | 16.9 ~ 138 | 10 .25 ~ 62 | 8347 ~ 15820 | 520 |
| 315 | 75 | 530 | 140 | 22.5 ~183 | 10 .25 ~ 62 | 11068~ 19450 | 700 |
| 355 | 80 | 595 | 150 | 30~245 | 10 .25 ~ 62 | 14818 ~28014 | 1030 |
| 400 | 90 | 660 | 170 | 32.1 ~261 | 10 .25 ~ 62 | 15786~29918 | 1400 |
| 450 | 100 | 740 | 190 | 42.6 ~347 | 10 .25 ~ 62 | 2571~39881 | 1980 |
| 500 | 110 | 815 | 210 | 54.9 ~ 448 | 10 .25 ~ 62 | 27097~51180 | 2700 |
Keuntungan:
The advantage of CZPT High Efficiency, Low Noice Cone Worm Series Worm Gearbox design are dramatic. First, the total load is divided among more individual gear teeth, and the load is further divided where teeth support 2 lines of contact. This superior load distribution greatly increases load carrying capacity. Second, the improved torque throughput allows a smaller reducer to produce the same amount of torque, resulting in size and weight savings.
Double-enveloping worm gearing can carry loads that would require much larger and heavier cylindrical worm gearing.
Double-enveloping worm gearbox figure :
(Click on picture for more information)
| Aplikasi: | Motor, Mesin, Kelautan, Mesin Pertanian |
|---|---|
| Fungsi: | Distribusi Daya, Perubahan Torsi Penggerak, Perubahan Arah Penggerak, Perubahan Kecepatan, Pengurangan Kecepatan, Peningkatan Kecepatan |
| Tata letak: | Koaksial |
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Instalasi: | Tipe Horizontal |
| Melangkah: | Langkah Tunggal |
| Contoh: | US$ 500/Potong 1 Buah (Minimum Pemesanan) | |
|---|
| Kustomisasi: | Tersedia | Permintaan Khusus |
|---|
Calculating Gear Ratio in a Worm Reducer
The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:
Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft
For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.
It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.
When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.
Industri apa saja yang umumnya menggunakan alat pereduksi ulir?
Reducer ulir adalah komponen mekanik serbaguna yang banyak digunakan di berbagai industri karena keunggulan dan kemampuannya yang unik. Beberapa industri yang umum menggunakan reducer ulir meliputi:
- Penanganan Material: Reducer ulir banyak digunakan pada peralatan penanganan material seperti konveyor, elevator ember, dan derek untuk mengontrol pergerakan dan mengelola beban berat.
- Otomotif: Alat-alat ini digunakan dalam proses manufaktur otomotif, jalur perakitan, dan sistem penentuan posisi kendaraan.
- Makanan dan Minuman: Pengurang ulir digunakan dalam mesin pengolahan dan pengemasan makanan di mana kebersihan dan sanitasi sangat penting.
- Pertanian: Peralatan pertanian seperti sistem irigasi dan traktor menggunakan reduktor ulir untuk mengendalikan gerakan rotasi.
- Pertambangan dan Konstruksi: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
- Energi: Turbin angin dan sistem pelacak matahari menggunakan reduktor cacing untuk mengubah gerakan berkecepatan rendah dan torsi tinggi menjadi energi rotasi.
- Tekstil: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
- Kemasan: Peralatan pengemasan mengandalkan reduktor ulir untuk pergerakan dan penempatan bahan pengemasan yang presisi.
- Medis: Perangkat dan peralatan medis sering menggunakan reduktor ulir untuk akurasi dan pergerakan yang terkontrol.
- Pencetakan: Mesin cetak menggunakan pengatur aliran ulir untuk mengatur pemasukan kertas dan memastikan kualitas cetak yang konsisten.
Kemampuan reduktor cacing untuk menghasilkan torsi tinggi, desain yang ringkas, dan karakteristik penguncian otomatis menjadikannya cocok untuk aplikasi yang membutuhkan gerakan yang andal dan terkontrol di berbagai industri.
editor by CX 2023-08-22
