Our AdvantagesProducts Massive volume in Inventory, No MOQ needed We comply with all the worldwide expectations, these kinds of as ISO9001 and TS16949 specifications. With in depth requirments, we can also build your special designed merchandise. With a lot of years’ knowledge in this line, we will be dependable by our advantages in aggressive price tag, one particular-time supply, prompt response, on-hand engineering help and very good following-revenue companies.Additionally, all our production techniques are in compliance with ISO9001 requirements.
Large EPTT Wire Cable Puller
I.EPTT Application:
Mostly utilized for numerous cable production traces for single EPTT or front and rear double traction.
II.Software:
one. The EPTT frame is produced of high-quality steel plate right after bending and splicing, and the look is novel.
two. The equipment adopts the motor-EPTT EPTT, a reduction EPTT, and a hard EPTT framework of the upper and reduce helical EPTTs, a crawler wheel, secure EPTT, huge carrying ability and handy servicing.
three. The EPTT collection has far more than 10 technical specs of 200kg-15000kg, and there are two sorts of speed regulation constructions of Z4 DC motor or variable-frequency motor for customers to pick.
four. With electronic meter, it can exhibit the line pace and meter size in time.
5. It is outfitted with a ground shaft EPTT framework for users to use in cable, armor, copper EPTT shielding and winding generation strains.
six. The pressure tractor adopts magnetic powEPTTtension management, which is utilised for the traction of the insulation and sheath extrusion manufacturing line. The tension is instantaneously adjustable, preventing the abrasion of the cable in the sink soon after the extrusion, and successfully solving the synchronization dilemma. And the impact of uneven rigidity on the wire diameter.
7. The modest tractor has an total transferring or higher body shifting framework, which is hassle-free for customers to use in EPTT procedures and effectively improve the recurring service lifestyle of the track
EPTT information
III.EPTT Parameter
| Model | Type 200 | Type three hundred | Sort five hundred | Type 800 | Variety 1250 | Type 1600 | Variety 2000 |
| Cable by means of the outer diameter(mm) | 2~twenty | five~25 | five~40 | 8~60 | ten~80 | 15~one hundred | 20~120 |
| Max. traction drive(kg) | dua ratus | 300 | lima ratus | 800 | 1250 | 1600 | 2000 |
| Velocity(m/min) | seratus lima puluh | 150 | 100 | seratus | delapan puluh | 80 | enam puluh |
| Observe make contact with length(mm) | 520 | 620 | 750 | 1200 | 1500 | 1900 | 2100 |
| Track width(mm) | 70 | 70 | delapan puluh | seratus | seratus dua puluh | 120 | seratus tiga puluh lima |
| Amount of cylinder(pair) | 3 | tiga | tiga | lima | 5 | 6 | 7 |
| EPTT EPTT(kw) | 3 | 4 | 5.5 | tujuh.5 | tujuh.lima | 11 | sebelas |
| EPTT pace(rpm) | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| CEPTTr peak(mm) | seribu | 1000 | seribu | seribu | seribu | seribu | seribu |
| Overall dimension (LxWxH) | 1450x720x1500 | 1500x720x1500 | 1800x1000x1600 | 2500x1150x1650 | 2750x1150x1700 | 3100x1150x1700 | 3450x1200x1750 |
| Desain | Variety 2500 | Sort 3200 | Kind 4000 | Variety 5000 | Type 6000 | Sort ten thousand | Kind 15000 |
| Cable via the outer diameter(mm) | twenty~one hundred thirty | 25~one hundred fifty | thirty~one hundred eighty | fifty~200 | 60~two hundred | eighty~three hundred | 80~300 |
| Max. traction force(kg) | 2500 | 3200 | 4000 | 5000 | 6000 | 10000 | 15000 |
| Pace(m/min) | 60 | empat puluh lima | 40 | tigapuluh | 25 | 25 | dua puluh |
| Track get in touch with length(mm) | 2400 | 2700 | 2900 | 3250 | 3600 | 4800 | 5000 |
| Observe width(mm) | seratus empat puluh | 145 | seratus enam puluh lima | seratus enam puluh lima | seratus tujuh puluh | 240 | 180x2articale/90x2articale |
| Number of cylinder(pair) | 8 | 9 | sembilan | 10 | sebelas | empat belas | fourteen fourteen |
| EPTT EPTT(kw) | limabelas | limabelas | 18.5 | 22 | tigapuluh | 37 | lima puluh lima |
| EPTT pace(rpm) | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| CEPTTr peak(mm) | 1000 | 1000 | seribu | 1000 | seribu | 1000 | seribu |
| All round dimension (LxWxH) | 3800x1200x1750 | 4500x1280x1820 | 4600x1300x1900 | 5000x1350x1950 | 5350x1400x1950 | 7400x1630x2100 | 7500x2800x2200 |
IV. Relevant EPTT
Cable extrusion EPTT
A.Description
The device comfortable soft PVC, such as poly(PVC by sizzling press technique to be extruded insulation wire core)
B.EPTT parameter
| Sort amp Measurement | Screw Dia. (mm) | L/D ratio | Screw velocity (rpm) | Main motor (kw) | Barrel heating EPTT (kw) | Temp. contr. zones (human body/cross head) | Max. output ability (PVC) (kg/h) |
| SJ30X25 | dua puluh | 25:one | 5-a hundred and fifty | 11 | 3. enam | three/two | dua puluh |
| SJ45X25 | 45 | 25:1 | 10-one hundred twenty | 15 | sembilan | three/2 | lima puluh |
| SJ65X25 | enam puluh lima | 25:one | ten-a hundred | tigapuluh | 16 | 4/4 | seratus dua puluh |
| SJ90X25 | 90 | twenty five:one | ten-one hundred | sembilan puluh | tigapuluh | 4/4 | 280 |
| SJ120X25 | 120 | twenty five:1 | seven-sixty eight | 132 | 54 | 6/4 | 580 |
| SJ150X25 | seratus lima puluh | 25:one | six-60 | 185 | 88 | 6/4 | 880 |
| SJ200X25 | 200 | twenty five:one | four-40 | 250 | seratus empat puluh | 7/4 | 1100 |
Cable get-up and pay-off EPTT
Mostly employed for winding numerous signal cables and optical cables.
Cable strander
V. Deal
VI. Organization profile
HangEPTT EPTTterm Cable EPTTry Co., Ltd is a EPTTion of EPTT investigation and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and production of wire and cable gear and a variety of effective strength-conserving extrusion generation line of crucial EPTTrprises, so much, the principal item incXiHu (West Lake) Dis.Hu (West Lake) Dis. wire and cable Insulation and Sheathing generation Line, TQD sequence Pneumatic Variety belt Caterpillar, EPTT series Portal Type Shell out-off, LSP series Portal Kind EPTTke-up, A variety of Wire Accumulator, Capstan Haul-off, Pay-off amp EPTTke-up, Cooling Water Trough, and Optical Fiber EPTT, Communication Cable EPTT, EPTTal Cable EPTT.
Our organization has a specialized administration team who engages wire and cable tools EPTT much more than twenty many years, as well as experienced engineer and experienced workers, our honest company status and excellent income accomplishment, earn the EPTT from our domestic and overEPTT clients, the products are exported to United States, France, Spain, Portugal, EPTT Zealand, Brazil, MeXiHu (West Lake) Dis.co, Chile, South Africa, Zambia, Egypt, South Korea, Singapore, Indonesia, TEPTTd, Iran, and so on.
Manufacturing facility display
Tim Kami
VII.Buyer
Consumer going to
Cable extrusion creation line in the Usa
VIII.FAQ
#8722 Q: Are you the maker or trading company?
A: We are the manufacturer. We have a team of extremely competent engineers and authorities, who have been working in the discipline of OFC equipment for far more than 10 many years.
#8722 Q: What is your company’s principal generation?
A: We EPTTized in optical fiber and optical cable EPTT researching and production. Our merchandise incEPTT Optical fiber coloring and rewinding EPTT sequence, Optical fiber secondary coating line series, Optical cable strXiHu (West Lake) Dis.Hu (West Lake) Dis. line, Optical fiber cable sheathing line series and other optical cable tools.
#8722 Q: What can we provide our consumers?
A: Our professional creation and technological staff can train our customers’ staff and make sure the sleek manufacturing of customers. And will provide our customers with following-sales services.
#8722 Q: How EPTT is the EPTT warranty?
A: Warranty period of a single 12 months (because the completion of mechanical debugging at the buyer’s manufacturing unit)
#8722 Q: Why do I choose your organization?
A: We have a lot more than 10 years of expert expertise in the manufacturing of cable EPTTry, supplying substantial-quality, substantial-safety goods.
We have an experienced crew of experienced staff and engineers.
We can assist overEPTT coaching engineers.
We can customise the design, to take the customer’s sample design.
We can provide customers with following-revenue provider.
Some concerns about the TQD-2500KG Crawler-kind Pneumatic Puller from our buyer
-Q:How is the belt tension altered? Can this be completed in the course of production?
A:The two belts of the puller are controlled by two sets of higher and decrease cylinders respectively. The upper and lower sets of cylinders are managed by stress gauge and force regulator on the panel to manage the force.
The lateral tension of the belt is tensioned by a huge cylinEPTTvia rocker arm.
Air force can be altered online with an air storage bag
-Q: Are the belts EPTTn at each ends or with only (one pulley EPTT the prime and one pulley EPTTs the base)?
There are four traction wheels, two on the left are energetic traction wheels, and two on the rigEPTT are passive traction wheels.
Two lively traction wheels are EPTTn by a established of helical EPTTs
Allow us to make a quotation for you. pls kindly revert to us for the beneath details:
1. How a lot of kgs/meters to extrusion for every hour?
two. Reel/Flange Diameter, we need to have to quote right consider-up and pay off EPTT
3. Could you remember to deliver us a image of your cable construction?
4. Extrusion substance, I indicate cable sheath material? Cable sheath thickness?
5.Cable measurement?
six.Cable pulling velocity?
